ASAP 2.8 Server Manual

ASAP Conversational Interface Commands

HP NonStop ASAP Server Manual—522303-007

6-64

NODE Command

want a particular dnode, specify the dnode by system name (such as \SUPPORT)

or system number (\240).

TIME hh:mm m/d/y

defines the ending time of the display information in hours, minutes, month, day,

and year. For example, specifying “TIME 10:15” when the rate is 5 indicates that

statistics collected from 10:10 to 10:15 are displayed.

When a “?” appears immediately after the timestamp, it indicates that the statistics

are questionable and that there was a problem obtaining the statistics. Possibly a

node is down.

When a “<” appears immediately after the timestamp, the statistics were received

late by the Collector process. Late statistics indicate busy Expand lines.

is the hour.

is the minute.

m/d/y

is the month, day, and year. Valid m/d/y entries are mm/dd/yy, yyyy/mm/dd,

or mm/dd/yyyy.

NONULLOUT

displays only nodes with nonzero end-to-end statistics.

NODE Statistics

Table 6-8 lists the NODE statistics and description/options displayed with the HELP

NCPSTATS command.

Table 6-8. Node Statistics and Options

Statistics Description/Options

LRECV The total number of Level 4 links received

LSENT The total number of Level 4 links sent

NSYS The neighboring system number of the current path between the two nodes

PHOPS The number of physical hops between the two end-to-end nodes

PLDEV The LDEV of the current active path between the nodes

PRECV The total number of Level 4 packets received

PSENT The total number of Level 4 packets sent