ASAP 2.8 Server Manual

ASAP Conversational Interface Commands
HP NonStop ASAP Server Manual—522303-007
6-99
SET Command
All lines starting with a TGAL backslash are ignored.
ID $asap-pid
defines the ASAP process ID name set. This name set identifies a collection of
ASAP processes that are operating together to gather ASAP performance statistics
and operational state information. The default is $ZOO. Using the ID lets you
operate several ASAP programs in the same node or resolve a name conflict. This
ID is used to form process names:
INSPECT ON | OFF
provides a debugging tool for use of the ASAP developers only. Use this option
only when assisting HP in problem diagnosis.
ON
enables debugging.
OFF
disables debugging. The default is OFF.
IOCONTROL count
defines the maximum number of output lines that can be written to the output file
for any command before a prompt is issued.
This option is used to perform flow control between the ASAP Client and Server.
By limiting the maximum number of output lines per I/O, client/server loading on
communications infrastructure is controlled.
The More? prompt is a modeless prompt. Anything other than a carriage return is
interpreted as a command. To continue displaying statistical data for the current
command, press Return with no spaces. If Node statistics are being collected,
enter NO at the prompt to display Node statistics.
The default is 72 lines of output. To disable this feature, enter SET IOCONTROL 0.
Logical Function Process Name Default
Collector $ASAP-pid S $ZOOS
Monitor (node) $ASAP-pid M $ZOOM
SGP (CPU) $ASAP-pid 0-F $ZOO 0 through F
APP SGP $ASAP-pid H $ZOOH
DISK SGP $ASAP-pid J $ZOOJ
NODE SGP $ ASAP-pid G $ZOOG