ASAP 2.8 Server Manual

ASAP Conversational Interface Commands
HP NonStop ASAP Server Manual—522303-007
6-103
SET Command
The default is $SYSTEM.SYSTEM.ASAPCOL.
OBJECTIVESAUDIT ON | OFF
enables or disables TMF for auditing of the Objectives database. The default is
OFF.
OBJECTIVESDB filename
defines the name of the Objectives database file.
When you execute the first RANK or MONITOR command on a node for a specific
ASAP ID, the ASAP CI always requests the name of the objectives database from
the ASAPMON process referred to by that ASAP ID. If the ASAP CI cannot
communicate with ASAPMON, it reverts to the database you set in the SET
OBJECTIVESDB command.
The default is $asap-database-subvolume.DBOBJ. Due to I/O activity in the
ASAP database volume, HP recommends that you locate the objectives database
file on another disk volume.
OBJECTIVESEVENT ON | OFF
enables ASAP for event generation when objectives are not met for attributes
where event generation is specified. The default is OFF.
OBJECTIVESEVENTUP ON | OFF
enables ASAP for generation of up events when alerts for which down events were
generated recover to an acceptable state. The default is OFF.
OBJECTIVESEVENTCONSOLE ON | OFF
displays event messages on the operator console. The default is ON.
OBJECTIVESEVENTCONSOLEUP ON | OFF
displays up event messages on the operator console. The default is ON.
OBJECTIVESEVENTSUBJECT ON | OFF
ON
causes ASAP to mark the domain name token (zasp-tkn-asap-dname) as the
subject token in ASAP event buffers.
OFF
causes ASAP to mark the ASAP component token (zasp-tkn-asap-component)
as the subject token in ASAP event buffers.
The default is SET OBJECTIVESEVENTSUBJECT OFF.