ASAP 2.8 Server Manual

ASAP Conversational Interface Commands
HP NonStop ASAP Server Manual—522303-007
6-110
SET Command
•
To reset the KEY value for partition 1 of the DISK entity to its default:
SET PARTITION DISK 1 KEY RESET
•
To enable FORMAT2 support:
SET PARTITION FORMAT2 ON
PRIMARY cpu | *
defines the primary CPU number for the Collect or Monitor process started by the
STARTUP command. If this CPU is unavailable, no other CPU is used. The default
is asterisk (*), which is all CPUs for the specified system.
PRIORITY server-priority
defines the execution priority of the Monitor or Collect process started by the
STARTUP command.
The default is 160.
PROCESS entity-option
defines startup options for Process monitoring within ASAP.
CPU cpu-num
defines the CPU that the PROCESS SGP process will reside in.
ON | OFF
turns Process monitoring on and off. The default is ON.
OBJECT filename
specifies the name of the Process SGP program file. The default is
$SYSTEM.SYSTEM.ASAPPRO.
The SET Process parameters are:
AGG
when present, ASAP creates aggregate and/or state propagated group
records for processes defined as a part of logical process groups.
AGGONLY
when present, ASAP creates aggregate and/or state propagated group
records for processes defined as a part of logical process groups, and it
writes only these group records to the ASAP database.
MINSTATE
defines the state at which the Process SGP should consider a domain to
be in an alert state. Valid values are 2 through 8; the default is 3.