ASAP 2.8 Server Manual

ASAP Conversational Interface Commands
HP NonStop ASAP Server Manual—522303-007
6-118
SET Command
DETAIL
instructs the Spooler SGP to return individual detail records by default. The
Spooler SGP otherwise operates in aggregation mode by default, returning
one aggregate record for all collectors, one for all devices, and one for all
print processes.
RATE #mins
overwrites the ASAP default rate parameter for the Spooler SGP only.
Instructs the Spooler SGP to sample at this rate.
TRACE
instructs the Spooler SGP to log trace records to the ASAP log file.
Example
+SET SPOOLER ON, OBJECT $SYSTEM.SYSTEM.ASAPSPL, PARAMETERS
“RATE 5”
+SET SPOOLER ON, PARAMETERS “DETAIL”
SYNC minutes, frequency
specifies the interval (in minutes past midnight) and the number of times
(frequency) that the system clock of the node in which the Monitor resides is
automatically synchronized to the system clock of the node specified with the
Collect option.
If Monitor and Collect are in the same node, this option has no meaning. For this
SYNC option to function, the Monitor must be accessed by someone with a super-
group user ID. For more information, see SYNCSLOW ON | OFF.
minutes
specifies the number of minutes past midnight.
The default number of minutes is 0.
frequency
specifies the number of times the Monitor’s system clock is automatically
synchronized to the node’s system clock. The default frequency is 0.
The default is 0,0.
Example
This example synchronizes all the nodes in the network twice a day, first at 2:30
a.m. and again at 5:00 a.m.
+SET SYNC 150, 2
+STARTUP \*