ASAP 2.8 Server Manual

ASAP Conversational Interface Commands
HP NonStop ASAP Server Manual—522303-007
6-124
SHOW Command
RATE minutes
defines the interval, in minutes, that TMF statistics are reported back to
the Collector. ASAPTMF uses the interval provided by the operator.
The default is the ASAP RATE.
The ASAP monitor does not check the contents of the parameter string. All
parameter data is passed to the ASAPTMF process without modification.
This example shows the SET TMF command:
+SET TMF ON, OBJECT $SYSTEM.ASAP.ASAPTMF, PARAMETERS "RATE
10"
To set PARAMETERS to null, enter either of:
SET TMF PARAMETERS
SET TMF PARAMETERS, entity-option
TRACE ON | OFF
turns an internal trace on and off for debugging purposes only. Use this option only
when assisting the HP Global Customer Support Center in problem diagnosis.
The default is OFF.
SHOW Command
The SHOW command displays information about the Entities defined to ASAP using
the ASAP Entity Definition Language (EDL).
entity
is the name of an ASAP entity as defined in EDL.
attribute
is the name of an attribute as defined for the entity in EDL.
DETAIL
shows detailed information about the entity.
ATTRIBUTES
shows the attributes defined for an entity.
SHOW [entity] [attribute]
[, DETAIL]
[, ATTRIBUTES]
Note. Attributes that support objectives are identified with an asterisk in SHOW command
output.