ASAP 2.8 Server Manual

Running ASAP
HP NonStop ASAP Server Manual—522303-007
3-2
Starting the ASAP Collector
Starting the ASAP Collector
Before you start the ASAP Collector, you must use the ASAP SET command to define
the ASAP Collector options. You can set options through OBEY files, TACL macros, or
interactively from the ASAP CI. For a complete list of SET options for the collector, see
SET Command on page 6-87.
When you set up the ASAP Collector, only these SET command options affect its
configuration:
•
SET BACKUPCPU
•
SET BUFFERED
•
SET CLEANTIME
•
SET DB
•
SET DBMAXDAYS
•
SET DBMAXDAYSTOPURGE
•
SET DBROLLOVERSUBVOLPREFIX
•
SET DBROLLOVERFILEPREFIX
•
SET ID
•
SET OBJCOLLECT
•
SET PARTITION
•
SET PRIMARY
•
SET PRIORITY
•
SET RATE
•
SET RETAIN
•
SET SLEEPTIME
Starting the Collector Process
After you define the ASAP Collector options, you can start the Collector process. This
example sets up the collector on $Data.asapdb, purging all records daily at 12:15 a.m.
and not collecting availability records between 11:00 p.m. and 12:30 a.m.:
+set db $data.asapdb.db
+set retain none
+set sleeptime 2300, 0030
+set clean 0015
+STARTUP COLLECT