ASAP 3.0 Client Manual

HP NonStop ASAP Client Manual Page 33 of 161
Installing the SSG
For a detailed description of how to install the SSG on NonStop servers, see the
SeeView Server Gateway (SSG) Manual.
For D43 and later, the SSG is normally already installed on NonStop systems. If SSG
is already installed, you do not need to reinstall it.
To see if the SSG is installed on your local host node:
TACL 1 > SSGCOM
If START or STATUS commands are available from within SSGCOM, the SSG
command interpreter, the SSG is installed on your system.
If SSG is not installed on your system, you need to perform a SSG Local Node Install
before you can use ASAP. ASAP does not require Remote Server Call (RSC), so you
do not need to install RSC before using ASAP.
To install the SSG on your local node:
1. TACL 1 > LOGON network-group.userid
2. TACL 2 > VOLUME $SSG-ISV-Volume.ZNOWSSG
3. TACL 3 > OBEY INSTALL
4. Follow the Local Node Install directions in the online help.
5. When SSG installation is complete, start the SSG by using the SSGCOM
command interpreter START command. For example:
TACL 1 > SSGCOM
+ START