ASAP 3.0 Client Manual

HP NonStop ASAP Client Manual Page 36 of 161
Running the CSG
You can start the CSG in two ways:
Manually: Double-click the CSG.EXE file.
Automatically: ASAP starts the CSG through ActiveX OLE automation.
Either method is acceptable, but to fully understand the process you might want to
manually start and configure the CSG the first time.
Starting and Configuring the CSG
Once the CSG is installed successfully, launch and configure it. The first time you click
the Connect button, you need to configure the CSG for your workstation. For detailed
information about how to set up and use the CSG, see the Csguser.doc file in the
Program Files\Tandem\CSG workstation directory.
To start and configure the CSG:
1. Run the CSG in any of these ways:
Double-click CSG.EXE to start it manually.
Click Connect at ASAP startup.
Click the Start Session toolbar button in the ASAP Session window.
2. From the CSG View menu, select Options to open the CSG.CSG Options
window.
If you are running the CSG for the first time, it displays: “The CSG has not been
configured. You must configure the CSG before continuing.” Click OK to open the
CSG Options window. You can reconfigure the CSG later by selecting Options
from the CSG View menu.
3. When the CSG.CSG Options window opens, click the Defaults tab if it is not
already selected. The Defaults property sheet appears.
4. In the Active Transport frame, select the TCP/IP or Async option to specify the
active transport.
If you use a TCP/IP connection to your NonStop OS host, select the TCP/IP
property sheet; then specify the TCP/IP address of your NonStop OS host. For
example:
TCP/IP Address: 168.87.8.20
TelNet Port: 23
Host Service Name: TACL