ASAP 3.0 Client Manual

HP NonStop ASAP Client Manual Page 40 of 161
Configuring CSG to use secure SSGCOM service
If the NonStop server has been configured with an SSGCOM service as described in
the prior section, you can configure the CSG to use the SSGCOM service to
completely eliminate the need for userid's and/or passwords. To do this perform the
following steps:
1. From the CSG main window, click on View…Options from the CSG main menu to
bring up the CSG Options dialog, and click on the “TCP/IP” tab.
2. Supply the TCP/IP host name or address and the Telnet port number on the server
(this is the port number specified in step 1 of “Configuring The NonStop Server”
above).
3. If you configured the SSGCOM service with DEFAULT set to ON (i.e. SSGCOM is
the default service), then clear the “Host Service Name” field on the CSG’s TCP/IP
tab. So the entire tab should look something like this: