ASAP 3.0 Messages Manual

HP NonStop Messages Manual Page 135 of 407
error-detail
error details returned from the DEVICE_GETINFOBYNAME_ procedure
Cause. The specified error was returned when trying to obtain information about the
specified tape device.
Effect. The Tape SGP sets the status for the domain to UNKNOWN.
Recovery. Verify that the specified domain is a valid tape device. If it is, contact your
system administrator.
4412
TAP MEDIASRV WRITE error:error
error
error which occurred when trying to perform a WRITEREAD to the MEDIASRV
server process
Cause. The specified error occurred when sending a SPI request to MEDIASRV.
Effect. The MEDIASRV process is closed and a new one is created at the next
sampling. All affected tape devices in the current sample are given a status of
SPIError.
Recovery. Make sure your version of MEDIASRV is compatible with ASAP, and that
MEDIASRV is properly installed.
4413
Error TAP SPL PARAM param-error
param-error
parameter being parsed when the error occurred
Cause. The specified parameter is not a valid parameter for the Tape SGP.
Effect. The parameter is ignored.
Recovery. Verify and correct the SET TAPE PARAMETER parameter that caused the
problem.
4414
TAP GETINFOLIST Error: error error-detail
error
error returned by the NonStop Kernel GETINFOLIST procedure