ASAP 3.0 Messages Manual

HP NonStop Messages Manual Page 145 of 407
Effect. The SPI buffer cannot initialize, so the SPI command is not sent to the
TMFSERVE process for this sampling. The error is reported against the appropriate
domain.
Recovery. Use spi-cmd and error-num to determine the cause of the error. If you
cannot resolve the problem, contact your HP support representative.
4551
ASAPTMF spi-cmd,SPI Error Send= error-num
spi-cmd
SPI command on which the error occurred
error-num
SPI error returned while sending the SPI buffer
Cause. When sending a SPI buffer to the TMFSERVE process, a SPI error was
returned.
Effect. The SPI buffer is not sent, so the associated TMF statistics are not obtained
for this sampling. The error is reported against the appropriate domain.
Recovery. Use spi-cmd and error-num to determine the cause of the error. If you
cannot resolve the problem, contact your HP support representative.
4552
ASAPTMF spi-cmd,FS Error Send= error-num
spi-cmd
SPI command on which the error occurred
error-num
file-system error returned while sending the SPI buffer
Cause. When sending a SPI buffer to the TMFSERVE process, a file-system error
was returned.
Effect. The SPI buffer is not sent, so the associated TMF statistics are not obtained
for this sampling. The error is reported against the appropriate domain.
Recovery. Use spi-cmd and error-num to determine the cause of the error. If you
cannot resolve the problem, contact your HP support representative.