ASAP 3.0 Messages Manual

HP NonStop Messages Manual Page 156 of 407
4699
ASAP ASAP Error #.... occurred xxxx time(s)
xxxx
is the number of times the error occurred
Cause. The error number was suppressed.
Effect. The error number suppressed had occurred xxxx times.
Recovery. None.
4700
ASAPCMM NonStop Kernel must be release D40 or Greater
Cause. ASAPCMM cannot be started.
Effect. ASAPCMM is not operating.
Recovery. Shut down the ASAPMON, set CMM off, and restart the ASAP Monitor.
4708
ASAPCMM Measure Data File In Use err
err
is the Measure error returned from the Measure subsystem.
Cause. ASAPCMM could not create a Measure data file.
Effect. ASAPCMM cannot obtain SWAN communication line counters. Comm line
status information is valid when ASAPCMM cannot obtain the communication line
counters.
Recovery. Stop and delete the measurement named ZCMM xxx, where xxx is the
ASAP ID. Use the Measure interface MEASCOM.
4715
ASAPCMM Error SET CMM PARAM CPU nn cpu
cpu
is the CPU number selected.
Cause. The Comm SGP could not start a measurement in the specified CPU.