ASAP 3.0 Messages Manual

HP NonStop Messages Manual Page 17 of 407
Section 1: ASAP and ASAP
Extension Error Messages
This section describes the ASAP and ASAP Extension error messages:
Topic
Page
ASAP Error Message Summary
17
ASAP Error Messages
34
ASAP Error Message Summary
Table 1-1 shows Monitor messages logged to EMS and ASAPLOG. Basic text
messages of this format are always logged to the ASAPLOG file. In addition, these
same messages are logged to EMS. If the SET EVENTS option is set to NOEMS, a
non-tokenized, simple text message is logged. If the SET EVENTS option is OFF, ON,
INFORMATIVE, or CRITICAL, a tokenized EMS event message is generated.
Table 1-1. Monitor Messages Logged to EMS and ASAPLOG
Message
Number
Monitor Messages
Parameters
1000
SGP Open pid error:
err
1001
MONITOR -> COLLECT, error:
err
1002
Send to SGP pid error:
err, type, read^L
1003
Send to COLLECT error:
err
1004
Bad SGP stat^sum reply
type, words
1005
Sync, COLLECT I/O error:
err
1006
Sync, delay too long
err
1007
Sync, msg too short:
iol
1008
Sync, not required:
delta
1009
Sync, Clock Corrected:
delta
1010
Sync, Can't Set Clock:
delta
1011
Short request received
count, buf, pid
1012
Received shutdown request
pid
1013
Illegal request received
buf, count, pid
1014
startup msg error message
charoffset