ASAP 3.0 Messages Manual

HP NonStop Messages Manual Page 244 of 407
ZASP-TKN-ASAP-ERRORNUM is ―1702‖.
1703: ZASP-EVT-DSK-MEAS-FILE-INUSE
ASAPDSK ASAPmeas file in use err
err
is the Measure error returned from the Measure subsystem.
Cause. The Measure subsystem has a measurement data file with the same name as
ZASPxxx, where xxx is the ASAP ID. The Disk Statistics Gathering process (SGP)
could not delete it.
Effect. ASAPDSK cannot obtain disk counters.
Recovery. Close the file through MEASCOM. The disk SGP will attempt to start the
measurement during the next sample period. You can also use the ASAP
Conversational Interface (CI) and specify another volume, subvolume, or both. Once
you specify another location, restart the ASAP Monitor.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is ―1703‖.
1704: ZASP-EVT-DSK-BAD-VOLUME-SUBVOL
Set Disk param VOLUME/SUBVOL to another location
Cause. The Measure subsystem has a measurement data file with the same name as
ZASPxxx, where xxx is the ASAP ID. The Disk Statistics Gathering process (SGP)
could not delete it.
Effect. ASAPDSK cannot obtain disk counters.
Recovery. Use the ASAP Conversational Interface (CI) to set ASAPDSK with a
different volume or subvolume than previously specified. If you used the default, try a
volume other than $SYSTEM.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is ―1704‖.
1705: ZASP-EVT-DSK-MEASFH-TRAPPED
ASAPDSK MEASFH Trapped err