ASAP 3.0 Messages Manual

HP NonStop Messages Manual Page 54 of 407
Check that the NonStop Kernel Subsystem Manager is secured properly. If the
problem persists, contact your HP representative.
1230
Can't Open Subsystem Mgr ($ZEXP), Error: err
err
is the file-system error number associated with the last operation on the file.
Cause. A Subsystem Manager does not exist.
Effect. ASAP and the subsystem cannot communicate.
Recovery. The FILEINFO system call returned this error. For corrective action for the
specified error code, see the Operator Messages Manual or the Guardian Procedure
Errors and Messages Manual .
Check that the Expand Manager is up and running. Retry the request. If the problem
persists, contact your HP representative.
1231
Can’t Build SPI Request, Error: err
err
is one of these SPI error numbers:
0
Indicates there is no error
-1
Indicates an invalid buffer format
-2
Indicates an invalid parameter value
-3
Indicates a missing parameter
-4
Indicates an invalid parameter address
-5
Indicates the buffer is full
-6
Indicates an invalid checksum
-7
Indicates an internal error
-8
Indicates the list token was not found
-9
Indicates an invalid token code or map
-10
Indicates an invalid subsystem ID
-11
Indicates the operation is not supported
-12
Indicates insufficient stack space
Cause. The Expand SGP could not build a Subsystem Programmatic Interface (SPI)
request buffer.