ASAP 3.0 Messages Manual

HP NonStop Messages Manual Page 56 of 407
-12
Indicates insufficient stack space
Cause. A Subsystem Programmatic Interface (SPI) error occurred in communication
between the Expand SGP and the Expand Manager.
Effect. The Monitor cannot communicate with the Expand Manager.
Recovery. Check that the Expand Manager is up and running. If the problem persists,
contact your HP representative.
1234
Expand SGP -> ExpMgr ($ZEXP) Retry Counts: cnt
cnt
is the number of retries.
Cause. The Expand SGP could not communicate with the Expand manager.
Effect. ASAP and the subsystem cannot communicate.
Recovery. If the problem persists, contact your HP representative.
1235
Expand SGP -> No path found for Expand Line Ldev: ldev
ldev
is the logical device number of the Expand path.
Cause. The Expand SGP could not obtain Level 4 statistics for a multiline Expand
configuration.
Effect. ASAP does not obtain path statistics from the Expand manager.
Recovery. This error message is used by HP for problem isolation. Contact your HP
representative.
1236
Expand SGP -> Can’t obtain Path statistics Error: err,
ldev
err
is the SPI error number returned by the $ZEXP process.
ldev
is the logical device number of the Expand path.