ASAP 3.0 Messages Manual

HP NonStop Messages Manual Page 67 of 407
Cause. The process was alive but statistics were not returned, possibly because of an
internal NonStop operating system error.
Effect. The PCB busy information in the sample might be distorted.
Recovery. If the problem persists, contact your HP representative.
1307
Process Not in the Sample Data: pin#, which
pin#
represents the PIN number of the process.
which
represents:
0
Current sample array
1
Previous array
Cause. The process specified is not in the internal sample array. This is an internal
error.
Effect. PCB information cannot be returned.
Recovery. If the problem persists, contact your HP representative.
1308
bad SMON Subsampling
Cause. Internal ASAP algorithms are detecting bad subsampling.
Effect. Subsample data is not being reported for this sample interval, or the
PCBSTATS data is inaccurate during this sample interval.
Recovery. The Monitor is designed to readjust itself and recover. However, if the
problem persists, contact your HP representative.
1309
Unable to collect PCB statistics, error: err
err
indicates the outcome of a PROCESSINFO system call and returns one of:
0
Returns the status for process CPU, PIN.
1
Indicates the process CPU, PIN does not exist or does not match the
specified criteria. The Monitor returns the status for the next higher CPU,