ASAP 3.0 Messages Manual

HP NonStop Messages Manual Page 68 of 407
PIN in the specified processor. The four-word process ID of the process for
which the status is being returned includes the process ID parameters, if
they are present.
2
Indicates the process CPU, PIN does not exist, and no higher CPU, PIN in
the specified process that matches the specified criteria exists.
3
Indicates the Monitor cannot communicate with the CPU.
4
Indicates the CPU does not exist.
5
Indicates that the system specified by sysnum could not be accessed.
99
Indicates a parameter error.
Cause. The Monitor could not collect PCB information.
Effect. A zero value was returned rather than the PCB statistics values.
Recovery. The FILEINFO system call returned this error. For corrective action for the
specified error code, see the Operator Messages Manual or the Guardian Procedure
Errors and Messages Manual .
Retry your request later. If the problem persists, contact your HP representative.
1399
ASAP ASAP Error #.... occurred xxxx time(s)
xxxx
is the number of times the error occurred.
Cause. The error number was suppressed.
Effect. The error number suppressed occurred xxxx times.
Recovery. None.
1400
Can’t get processor type info, Error: err
err
indicates the outcome of a CPU_GETINFOLIST_ system call and returns one of
these values:
0
Returns information for the specified process.
1
Returns a file-system error.
2
Returns a parameter error.
3
Returns a bounds error.
4
(Reserved.)