ASAP 3.0 Messages Manual

HP NonStop Messages Manual Page 69 of 407
5
Indicates you cannot communicate with the CPU; the CPU might not be
present.
6
Indicates you cannot communicate with the node.
7
Indicates an invalid return attribute was supplied.
8
Indicates the specified node is running a C-series RVU; this system call
cannot obtain information from a system running a C-series RVU.
Cause. The Monitor could not retrieve the CPU processor type.
Effect. A CPU processor type value was not returned.
Recovery. The FILEINFO system call returned this error. For corrective action for the
specified error code, see the Operator Messages Manual or the Guardian Procedure
Errors and Messages Manual .
Check that your NonStop operating system version and ASAP version are compatible.
If the problem persists, contact your HP representative.
1401
Can’t Call CPU_GETINFOLIST_, Error:
err
indicates the outcome of a CPU_GETINFOLIST_ system call and returns one of
these values:
0
Returns information for the specified process.
1
Returns a file-system error.
2
Returns a parameter error.
3
Returns a bounds error.
4
(Reserved.)
5
Indicates that you cannot communicate with the CPU; the CPU may not be
present.
6
Indicates that you cannot communicate with the node.
7
Indicates that an invalid return attribute was supplied.
8
Indicates the specified node is running a C-series RVU;
CPU_GETINFOLIST_ cannot obtain information from a system running a
C-series RVU.
Cause. The Monitor could not retrieve CPU configuration information or statistics for
the specified processor.
Effect. A zero value was returned instead of CPU configuration and statistics
information.