ASAP 3.0 Server Manual

HP NonStop ASAP Server Manual Page 128 of 342
behavior can be turned on with the RUL aggregate control and results in this priority
ranking of the possible values, from low to high:
PState
WState
UnAlloc
None
Starting
Lreq
Runnable
Lpipe
DebugBrk
Pon
DebugTrp
Iopon
DebugReq
Intr
InspMBrk
Lcan
InspBrk
Ldone
InspTrp
Ltmf
InspReq
Linsp
SaveAben
Stopping
XIOInit
As an example, when RUL is specified, a process in the Stopping process state is
considered to be worse than a process in the Runnable process state, so the Stopping
value is propagated to the aggregate record based on the priority rule. Like other
attributes, the worst associated state value is always propagated to the aggregate
level.
Default Process MetricRule Settings
This table shows the MetricRule aggregate controls that are set for Process monitoring
when you first install ASAP. Any other Process attributes have no default setting and
are state propagated:
Attribute
Default Value
Pri
MIN
Busy
SUM
PState
RUL
WState
RUL