ASAP 3.0 Server Manual

HP NonStop ASAP Server Manual Page 200 of 342

specifies that information for all systems is provided.

SAMPLES count

specifies the number of sample periods to display. A sample period is defined by

the RATE option in the SET command. You can specify 0 through 255 sample

periods.

dnode

specifies the node of the destination Expand system. The default is all the systems

connected to the sending node (snode), which has the same effect as \*. If you

want a particular dnode, specify the dnode by system name (such as \SUPPORT)

or system number (\240).

TIME hh:mm m/d/y

defines the ending time of the display information in hours, minutes, month, day,

and year. For example, specifying ―TIME 10:15‖ when the rate is 5 indicates that

statistics collected from 10:10 to 10:15 are displayed.

When a ―?‖ appears immediately after the timestamp, it indicates that the statistics

are questionable and that there was a problem obtaining the statistics. Possibly a

node is down.

When a ―<‖ appears immediately after the timestamp, the statistics were received

late by the Collector process. Late statistics indicate busy Expand lines.

is the hour.

is the minute.

m/d/y

is the month, day, and year. Valid m/d/y entries are mm/dd/yy,

yyyy/mm/dd, or mm/dd/yyyy.

NONULLOUT

displays only nodes with nonzero end-to-end statistics.