ASAP 3.0 Server Manual

HP NonStop ASAP Server Manual Page 233 of 342
CPU cpu-num
defines the CPU that the DISK SGP process will reside in.
ON | OFF
ON enables network-wide disk statistics reporting. OFF disables network-wide
disk statistics reporting.
The default is OFF.
OBJECT ASAP DISK-program-file-name
defines the ASAP/DISK program object file name. The program is started
automatically on each node by the ASAP Monitor if ON is specified.
The default is $SYSTEM.SYSTEM.ASAPDSK.
PARAMETERS "DISK-param [DISK-param}..." | null
specifies the disk-specific parameter string to be passed to the ASAPDSK
process at startup time. The parameter list must be enclosed in quotation
marks. The default is null. DISK-param values are:
CPU cpu-number
defines the CPU where the MEASFH process resides. If an unavailable
CPU is selected, the ASPDSK process selects the next available CPU.
The default is the same as the CPU that the ASAP CI is executing in.
NOMEAS
prevents disk performance statistics from being collected. Disk state
information, and the disk information GBUsed, Capacity, MB Available, and
%MBUsed are collected during each sample period. On D-series nodes,
disk controller and unit information is displayed. On G-series nodes,
Group, Slot, and Module information is displayed.
RATE minutes
defines the interval, in minutes, that disk statistics are reported back to the
Collector. The default is the ASAP rate.
VOLUME [$ volume] [.] [ subvolume]
specifies the location of the Measure data. The maximum file size is
approximately 60 KB. This file is used by the Measure subsystem to obtain
DP2 disk counters. The file is deleted when the ASAP Monitor stops the
ASPDSK process.