ASAP 3.0 Server Manual

HP NonStop ASAP Server Manual Page 254 of 342
values are 2 through 32767. ASAP will allocate at least 1 less domain than
you specify. The default setting can vary by ASAP version.
MAXDOMAINS
defines the maximum number of monitored domains. The Process SGP
will allocate memory to support that number of monitored domains. Valid
values are 2 through 32767. ASAP will allocate at least 1 less domain than
you specify. The default setting can vary by ASAP version.
MBYTES
defines the size in megabytes of the memory pool allocated to store
domains that are dynamically resolved at each interval. The default setting
can vary by ASAP version.
Note
The MONITOR PROCESS, LIST, DETAIL command will return information
about the maximum value parameters and the memory pool utilization.
Examples
To turn process monitoring on and to set the state at which ASAP considers a
process to be alerting enter:
SET PROCESS ON, PARAM "MINSTATE 6"
To turn on aggregation for all levels of all hierarchically named processes:
SET PROCESS PARAM "AGG"
PROCESSBUSY
PROCESSBUSY ENTRIES count | SUBSAMPLES count
controls the collection of process statistics.
ENTRIES count
optionally specifies the number (1 through 20) of busy processes to collect or
display from each CPU during a sample interval. The default is 3.
SUBSAMPLES count
optionally specifies the number (1 through 10) of subsamples to take during a
sample interval. The default is 3.
The ASAP Monitor takes subsamples during one sample interval specified by
the SET RATE command. Because of a potentially long sample interval, some