ASAP 3.0 Server Manual

HP NonStop ASAP Server Manual Page 68 of 342
2 minutes for a 25 node network with 4 CPUs per node
3 minutes for a 50 node network with 2 CPUs per node
5 minutes for a 100 node network with 4 CPUs per node
10 minutes for a 100 node network with 8 CPUs per node
Starting and Stopping ASAP
This subsection explains how to stop and start the ASAP Environment. For frequent
use, you can put these commands in OBEY files.
Starting ASAP
1. Start ASAP by entering ASAP at a TACL prompt:
TACL 1 > ASAP
ASAP - Availability Stats and Performance - T0402V02.5 (15OCT2004)
Copyright (C) 1999, 2001-2004 Hewlett-Packard Company
Obey $SYSTEM.SYSTEM.ASAPCONF
+
2. Verify the ASAP configuration by entering the SET command to display the current
configuration values. For example:
+SET
ASAP Configuration Control settings:
Version................. T0402V02.05 (15SEP2004)
Action.................. ON
ActObject............... $SYSTEM.SYSTEM.SEEVIEW
ActShell................ $SYSTEM.SYSTEM.ASAPACT
Asaplog................. $SYSTEM.SYSTEM.ASAPLOG
Backupcpu............... *
Buffered................ OFF
Cleantime............... 0000
Collect................. \CENTDIV
DB...................... $DATA.ASAPDB.DB
DBMaxDays............... 0
DBMaxDaysToPurge........ 2
DBRolloverSubvolPrefix.. ASAP
DBRolloverFilePrefix.... Z
EDL..................... $SYSTEM.SYSTEM.ASAP2EDL
Helpfile................ $SYSTEM.SYSTEM.ASAPHELP
ID...................... $V03(Collect $V03S, Monitor $V03M Scp $V03*)
IoControl............... 64
Logging................. OFF
Logfile................. $SYSTEM.SYSTEM.LOGFILE