ASAP 3.1 Server Manual

HP NonStop ASAP Server Manual Page 147 of 360
STATES
displays the associated OEM state for each attribute where StatePair is true.
These OEM states are reported, depending on the type of ranking used (see the
SET OBJECTIVESRANK option of the SET Command):
Existence
1
Object exists.
Up or OK
2
Object is up or meets objectives.
Low
3
Object utilization is low.
Medium
4
Object utilization is medium.
High
5
Object utilization is high.
Warning
6
Object is at Warning level.
Critical
7
Object is at Critical level.
Down
8
Object is down or not operational.
TIME hh:mm m/d/y
defines the ending time of the display information in hours, minutes, month, day,
and year. For example, specifying TIME 10:15 when RATE is 5 indicates that
statistics collected from 10:10 to 10:15 are displayed.
hh
is the hour.
mm
is the minute.
m/d/y
is the month, day, and year. Valid m/d/y entries are mm/dd/yy,
yyyy/mm/dd, or mm/dd/yyyy.
AGGREGATE
specifies that aggregate records be output along with the detail records.
AGGREGATE is on by default.
AGGREGATEONLY
specifies that only aggregate records are output in the command.
AGGREGATEONLY is useful in large domain populations for controlling the
amount of data sent to the ASAP Client.