ASAP 3.1 Server Manual

HP NonStop ASAP Server Manual Page 185 of 360
REPEAT
causes ASAP to repeat the event for each interval where the objective is
not met.
NODISPLAY
overrides any global settings to suppress display of the event on the
operator console.
down
is the event number to use for the down event, when the objective
comparison fails. Events must be numbered in the range 6000 through
9999. Event number 4000 is used when this is not specified. The ASAP
EMS event template for the down event is not applied when custom down
events are defined.
-up
is the event number to use for the up event, which is triggered when the
objective comparison returns to normal after a failure. The number
specified must be in the range 6000 through 9999. Event number 4001 is
used when this is not specified. The minus sign must precede the up event
number even if the down event number is not specified. The ASAP EMS
event template for the up event is not applied when custom up events are
defined.
STATUS
When events are turned on (using SET OBJECTIVESEVENT ON), status
changes in ASAP system entities default to generate one critical EMS event.
The STATUS attribute specifies changes to the default behavior for system
entities. Use STATUS with ASAP user-defined entities to define all event
behavior for status changes.
NOEMS
Used only with the STATUS attribute. NOEMS turns off automatic event
generation for status changes in ASAP system entities.
action
ACTION string | rule [WAIT wait] [NOREPEAT]
string
is an action string where the first word in the string is a command
interpreter name such as TACL, SCF, or FUP, and the remainder of the