ASAP 3.1 Server Manual

HP NonStop ASAP Server Manual Page 194 of 360
 IFrm(S/R) displays number of Data Frames sent and received.
 SFrm(S/R) displays number of Connect Commands sent and rcvd.
 UFrm(S/R) displays number of Connect Responses sent and rcvd.
For Expand over SERVERNET Level 2 i/s frames have these meanings:
 IFrm(S/R) displays number of Data Frames sent and received.
 SFrm(S/R) displays number of Active Connect Cmnds sent & rcvd.
 UFrm(S/R) displays number of Passive Connects sent & rcvd.
HISTO
displays a histogram of the message size distribution. The histogram provides
information about message sizes less than the values of 64, 128, 256, 512, 1024,
2048, and 4096.
IP
displays the Expand statistics for Expand lines configured using either the IP
transport or the ATM transport. Only lines configured using IP or ATM are
displayed. Statistic counters reported are:
DFrame
Number of data frames sent and received.
KB Bytes
Number of data bytes sent and received
CnCmd
Number of connect commands sent and received
CnRsp
Number of connect responses sent and received
QyCmd
Number of query commands sent and received
QyRsp
Number of query responses sent and received
MML
Number of times a memory low condition was sent to the line
handler process
IvFr
Number of received frames too small for frame headers
DFr
Number of dropped frames
IA
Number of frames from an unexpected node
LINE
displays only Expand line handlers for subtype 0, 2, 3, 4, and 6. You can use this
option with all other LH options.