ASAP 3.1 Server Manual

HP NonStop ASAP Server Manual Page 243 of 360
COLLECT collect-node
defines the network node where the Collect process resides. The Monitor process
reports statistics to the Collect process on the specified node. The default is the
system where you issued the START COLLECT command.
COMM entity-option [, entity-option ],
determines settings, parameters, alarm threshold settings for the COMM entity.
CPU cpu-num
defines the CPU that the COMM SGP process will reside in.
ON | OFF
ON enables network-wide comm statistics reporting. OFF disables network-
wide comm statistics reporting. The default is OFF.
OBJECT ASAP COMM-program-file-name
defines the ASAP/COMM program object file name. The program is started
automatically on each node by the ASAP Monitor if ON is specified. The
default is $SYSTEM.SYSTEM.ASAPCMM.
PARAMETERS "COMM-param [COMM-param]..." | null
specifies the communication-specific parameter string to be passed to the
ASAPCMM process at startup time. The parameter list must be enclosed in
quotation marks. The default is null. COMM-param values are:
CPU cpu-number
defines the CPU where the MEASFH process resides. If an unavailable
CPU is selected, the ASPCMM process selects the next available CPU.
The default is the same as the CPU that the ASAP CI is executing in.
NOMEAS
prevents COMM performance statistics from being collected. COMM state
information, and the COMM information State, LDEV, PIN, Type,
Configuration info for D-Series or G-Series, and the program object file are
collected during each sample period.
RATE minutes
defines the interval, in minutes, that COMM statistics are reported back to
the Collector. ASAPCMM uses the interval provided by the operator. The
default is the ASAP RATE.