ASAP 3.1 Server Manual

HP NonStop ASAP Server Manual Page 258 of 360
CRITICAL Critical problem alert
DOWN Down object alert
The default is CRITICAL.
OBJECTIVESEVENTMAX max-events-per-domain-per-interval
defines the maximum number of events that ASAP should generate per domain
per statistics interval. The default is 1.
OBJECTIVESRANK STANDARD | PERCENT | HISTORICAL
sets the type of analysis and ranking by ASAP when applying objectives against
attribute values. The default is STANDARD.
STANDARD
ASAP reports on attributes as nonranked, up, down and critical.
PERCENT
ASAP reports on attributes using all OEM states based on the percentage the
attribute was over or under its objective.
HISTORICAL
ASAP uses the PERCENT model to create an initial state for an attribute, then
uses the last state for the attribute to create a more critical state for the
attribute.
OBJMONITOR monitor-object
defines the Monitor program object file name.
The default is $SYSTEM.SYSTEM.ASAPMON.
PARTITION partition-desc. | reset-desc. | FORMAT2 { ON | OFF }
defines or resets partitioning parameters for the ASAP database. These
parameters can be set or reset individually for each entity, globally for all entities,
or both.
When used with no options, SET PARTITION displays the current partitioning
settings.
Note
Changes to partition settings do not automatically take effect after a SET
PARTITION command. To enable changes:
1. Stop the ASAP Collector process.