ASAP 3.1 Server Manual

HP NonStop ASAP Server Manual Page 261 of 360
volume-name
the name of the NonStop OS volume on which the partition will reside.
reset-desc.
RESET
resets all partitioning attributes for all entities, including the default settings.
{ entity | DEFAULT } RESET
resets all partitioning attributes for the specified entity, or the default
settings if you specify DEFAULT.
{ entity | DEFAULT } { part-num | ALL } RESET
resets the partitioning attributes of the specified partition of the specified
entity, or default settings. To reset the partitioning attributes of all partitions
for the specified entity, use ALL.
{ entity | DEFAULT } { part-num | ALL } part-opt RESET
resets a specific partitioning attribute for the specified entity and partition
number. To reset the default setting of the specific attribute, use
DEFAULT. To reset all partitions of the specified entity, use ALL.
FORMAT2 { ON | OFF }
enables or disables support of Format 2 files. Format 2 support lets ASAP
retain much more data by allowing the creation of much larger files and
partitions.
Notes
 You cannot specify a KEY, SYSNO, or VOLUME for a base partition (that
is, partition number 0). The latter is done by the SET DB command.
 You cannot specify KEY, SYSNO, and VOLUME values if the partition
number is ALL.
 You must provide a KEY or SYSNO value, or both, and a VOLUME for all
secondary partitions. If you do not, the partition description is marked
Invalid in the output of the SET PARTITION command, and the Collector
does not create the partition.