ASAP 3.1 Server Manual

HP NonStop ASAP Server Manual Page 263 of 360
creating the CPU database. Partition description 4 is ignored, even though
it is valid, because description 3 is invalid.
 If partitioning is enabled for an entity, the Valid column of the SET
PARTITION output indicates the status of each configured partition with
one of these values:
Value
Indicates That the Partition Definition
Is...
Used by Collector to
Create Database?
Yes
Valid.
Yes
No-Vol
Invalid because no volume was
specified.
No
No-Sys/Key
Invalid because no KEY or SYSNO was
specified.
No
No-Vol,Sys/Key
Invalid because no VOLUME and no
KEY or SYSNO was specified
No
No-Prior Inv
Invalid because a prior partition
definition was invalid. The definition
itself is correct, but a previous partition
definition for the entity is incomplete.
No
??-Key Seq
Questionable because the partitioning
key (a combination of the SYSNO and
KEY values) is less than the partitioning
key of a prior partition definition. Fix the
key sequencing.
Yes, with errors
??-Dup Vol
Questionable because a prior partition
definition uses the same volume. Each
partition must be on a separate volume.
Yes, with errors
??-Vol Unknown
Questionable because the specified
volume does not exist on the system on
which ASAP is running. Either you gave
a remote name for a partition volume or
a configuration is being prepared on one
system for another. Specify an existing
volume.
Yes, with errors
??-Vol Down
Questionable because the specified
volume is down. Specify a volume that
is not down.
Yes, with errors
??-Partn Size
Not optimal because the maximum
potential partition size defined by
PRIEXT, SECEXT, and MAXEXTENTS
exceeds the limit for the specified file
format.
Yes, with errors
??-Max Ext n/a
Not optimal because the MAXEXTENTS
value for the secondary partition is
ignored since FORMAT2 is on. The
Yes