ASAP 3.1 Server Manual

HP NonStop ASAP Server Manual Page 287 of 360
+SET DISK ON, PARAMETERS !Parameters nulled
+START \NODEB
node-name
specifies the individual system for which information is to be monitored or
collected. This starts the ASAP Monitor or Collect process on this node only. The
default is Monitor.
Example
This example shows how to use the STARTUP command:
+ SET DB $DATA1.ASAP-DB ! Specify Collect DB
+ STARTUP \LA COLLECT ! Start Collect server
+ SET COLLECT \LA ! Specify where Collect DB server resides
+ STARTUP \NEWYORK ! Start Monitor on NEWYORK,
+ STARTUP \SANFRAN MONITOR ! MONITOR is the default
+ STARTUP \CHICAGO ! Start Monitor on \Chicago
Considerations
 The STARTUP command starts Monitor, SGPs, or Collect processes on the
specified nodes with the specified options. The object file to use is specified with
the SET OBJMONITOR and OBJCOLLECT options. For SGP processes, the SGP
object is specified with the SET SGPName OBJECT option.
 The Monitor, SGPs, and Collect process behavior is based on the current values of
the SET command parameters when the process is started.
STATUS Command
The STATUS command provides status information about the ASAP system in the
specified node.
STATUS [ \node | \* ] [ MONITOR ]
[ COLLECT ]
[ TIMEOUT value ]
[ ppd-name ]
[ ACTIONS [ ASAP ] ]
[ ACTREQUEST ] ]
[ MSGS [<inx>] [<lines>] ]
[ RUN [<inx>] [<lines>] ]
[ * | <taskid> [<inx>] [<lines>] ]
[ LOG [ ON | OFF | DETAIL ] ]
[ TRACE <level> | DISK ] ]