ASAP 3.2 Messages Manual

HP NonStop Messages Manual Page 113 of 414
Cause. Format2 support is ON, and MaxExtents values were specified for one or
more secondary partitions. The Collector cannot set MaxExtents values for secondary
partitions with Format2 support enabled.
Effect. MaxExtents values defined for secondary partitions are ignored. The
MaxExtents value for the base partition of the entity is used for the secondary
partitions.
Recovery. Either disable Format2 support or do not specify MaxExtents values for
secondary partitions.
2043
OpenPart filename file-error partition-index
filename
database file that cannot be opened.
file-error
file-system error number.
partition-index
partition that cannot be opened.
Cause. The Collector could not open the specified database file and partition while
trying to create a database for a particular entity. Most likely a security violation
occurred.
Effect. The Collector cannot set the specified MaxExtents value for the partition. The
default value, from the base partition definition, is used.
Recovery. Depends on error. Enter SET PARTITION to view partitioning settings.
Correct any errors, then restart the Collector from the ASAP CI.
2050
DB^AltKeyFile^GET call fnamecollapse failed
Cause. The Collector could not get alternate key file info for the DB. The cause is
most likely a security violation.
Effect. The Collector cannot get alternate key file info.
Recovery. Make sure files are secured properly.
2051
DB^AltKeyFile^GET call fname expand failed