ASAP 3.2 Messages Manual

HP NonStop Messages Manual Page 132 of 414
name
name of entry being looked for
type
type of entry being looked for: SP = Supervisor; CL = Collector; DV = Device; PP =
Print Process
Cause. The Spooler SGP cannot find an entry of type type in its internal memory, but
this entry is referenced in another spooler entry.
Effect. The spooler tree structure is not correct and sampling information might not
add up.
Recovery. Verify the spooler name for the specified entry. A job, device, or location in
that spooler is referencing the specified entry, which does not exist. If the spooler
configuration is correct, note the name, create a saveabend file of the Spooler SGP,
stop the SGP, and contact your HP support representative.
4393
Timeout error occurred in get^spooler^stats for SGP SPL.
Cause. The spooler supervisor was too busy to return information to the SPL SGP.
Effect. The Spooler SGP tries five times, in one second intervals, before giving up.
Recovery. If this error occurs frequently, check why the spooler supervisor is so busy.
4394
SPL EDL loaded.
Cause. The Spooler EDL loaded correctly on startup of ASAP.
Effect. The Spooler SGP runs normally.
Recovery. Informational message; no corrective action is necessary.
4395
SPL Sampling delay processing: num
processing
processing area for elapsed time
num
the amount of elapsed time, in milliseconds, the specified processing took. This is
the elapsed time during processing, not the time the processing itself took.