ASAP 3.2 Messages Manual

HP NonStop Messages Manual Page 153 of 414
Recovery. Informational message; no corrective action is necessary.
4597
TMF Could not load all domains: maximum reached.
Cause. There are more domains defined in the Objectives Database than the TMF
SGP can accept.
Effect. All domains in the database exceeding the maximum are not monitored.
Recovery. Remove some domains from the Objectives Database using the
MONITOR TMF, DELETE command, then the COMMIT TMF command.
4598
TMF Autoconfiguration completed.
Cause. No domains were defined in the Objectives Database to monitor.
Effect. The TMF SGP configures all supported TMF domains by default.
Recovery. To modify the list of domains to monitor, use the MONITOR command,
then the COMMIT command. Autoconfigured domains are then automatically removed.
4599
ASAP ASAP Error #.... occurred xxxx time(s)
xxxx
is the number of times the error occurred
Cause. The error number was suppressed.
Effect. The error number suppressed had occurred xxxx times.
Recovery. None.
4601
sgpid Segment allocation error: error error-detail
sgpid
is the identifier of the File or Process SGP.
error
is the error code returned from the call to SEGMENT_ALLOCATE_.