ASAP 3.2 Messages Manual

HP NonStop Messages Manual Page 163 of 414
err
is the Measure error number.
Cause. ASAPCMM could not stop its measurement. err represents the Measure
error returned from the Measure subsystem.
Effect. ASAPCMM could not stop the measurement named ZCMM xxx, where xxx is
the ASAP ID.
Recovery. Stop and delete the measurement named ZCMMP xxx, where xxx is the
ASAP ID. Use the Measure interface MEASCOM.
4748
ASAPCMM Comm Measurement stopped
Cause. The ASAPMON process stopped the ASAPCMM process.
Effect. ASAPCMM stops its measurement.
Recovery. This message is informational only. No corrective action is required.
4750
Error SET COMM PARAM param
param
is the invalid parameter.
Cause. ASAPCMM detected an invalid parameter in the SET COMM ON,
PARAMETER command.
Effect. ASAPCMM uses the default values for all parameters.
Recovery. Ensure that all parameters in the ASAP startup file ASAPCONF are valid.
Then restart the ASAP Monitor.
4751
ASAPCMM ECB_Load Error error-text
error-text
is the error text returned from the Ecb_loadentities_ procedure.
Cause. The ASAP ecb_loadentities_ procedure returned the specified error when
trying to load the Comm entity.
Effect. The Comm entity does not load EDL records.