ASAP 3.2 Messages Manual

HP NonStop Messages Manual Page 170 of 414
Ssg.errdet
is the SSG error detail returned from the Seeview Server Gateway.
Ssg.errsubdet
is the SSG error subdetail returned from the Seeview Server Gateway.
Cause. The SSG buffer is full.
Effect. The Swap SGP writes records to the ASAP DB without the KMSF counters.
Recovery. Contact the GMCSC or HPVC depending on your geographical location
and submit a case. Include the SSG.err, SSG.errdet, the SSG. Errsubdet and the SSG
errortext from the accompaning 4802 messageif it exists.
4811
Max unknown domains reached
Cause. The ASAP Swap SGP exceeded its internal table limits. Too many phantom
or incorrect domain names was configured by an ASAP user.
Effect. The Swap SGP reports on all good domains configured and up to the limit of
unknown domains.
Recovery. Enter valid domain names or delete the phantom or bad domain names
from ASAP’s objectives database.
4812
ASAPSWP Max Monitored domains reached index
index
is the maximum value reached for monitored domains.
Cause. The maximum amount of valid Swap domain names has been configured by
an ASAP user.
Effect. The Swap SGP will report on the monitiored domains up to the maximum
supported limit. The exceeded domain records will not be written to the ASAP Swap
database file.
Recovery. Contact the GMCSC or HPVC depending on your geographical location
and submit a case.
4814
ASAPSWP Cannot start SSG <$nssB> process name in use SSG id