ASAP 3.2 Messages Manual

HP NonStop Messages Manual Page 231 of 414
1250: ZASP-EVT-EXP-PARAM-ERROR
Error SET EXPAND PARAM param
param
contains the parameter that caused the problem
Cause. ASAPEXP detected that an invalid parameter was specified in the ASAP
Conversational Interface (CI) SET EXPAND ON, PARAMETER command.
Effect. ASAPEXP uses the default values for all parameters.
Recovery. Ensure that all parameters contained in the ASAP startup file ASAPCONF
are valid; then restart the ASAP Monitor.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is ―1250‖.
1251: ZASP-EVT-EXP-ECB-LOAD-ERROR
ASAPEXP ECB_Load Error error-text
error-text
is error text returned from the Ecb_loadentities_ procedure
Cause. The ASAP ecb_loadentities_ procedure returned the specified error when
trying to load the Expand entity.
Effect. The Expand entity does not load EDL records.
Recovery. Recovery. This error might be caused by the EDL settings. For more
information on ASAP EDL, see the ASAP Client Manual.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is ―1251‖.
1252: ZASP-EVT-EXP-NO-OBJECTIVES
Unable to report object thresholds
Cause. The ASAP obejctives data base specified is incorrect, or ASAP2SYS contains
an error for the EXPAND Entity.
Effect. The Entity SGP will not report on objective thresholds.