ASAP 3.2 Messages Manual

HP NonStop Messages Manual Page 237 of 414
pin#
is the process identification number.
Cause. The system could not obtain the device name of the process. The process
probably went away before the device name was obtained.
Effect. The process information does not include a related device name.
Recovery. Informational message only; no corrective action is needed.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is ―1302‖.
1303: ZASP-EVT-DELTA-TIMES
pin:ProcessTime delta:Sampletime delta in .1 sec: pin#, dpt,
dst
pin#
is the process identification number.
dpt
is the delta of the process time for this PIN.
dst
is the delta of the sample time for this PIN.
Cause. ASAP detected a 100-percent process control block (PCB) busy state,
possibly because of an internal interface failure with the operating system.
Effect. The PCB busy information is suspect.
Recovery. If the problem persists, contact your HP support representative and
provide all relevant information:
Descriptions of the problem and accompanying symptoms
Details from the messages generated
System number
Numbers and versions of all related products
Supporting documentation such as Event Management Service (EMS) logs, trace files,
and a CPU dump, if applicable
Data Tokens.