ASAP 3.2 Messages Manual

HP NonStop Messages Manual Page 238 of 414
ZEMS-TK7N-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is ―1303‖.
1304: ZASP-EVT-DELTA-TOO-BIG
ProcessTime delta too big:last 2 INTs in .1 sec: pin#, dpt1,
dpt2
pin#
is the process identification number.
dpt1
is the third word of the process delta time for this PIN.
dpt2
is the last word of the process delta time for this PIN.
Cause. ASAP detected a 100-percent process control block (PCB) busy state,
possibly because of an internal interface failure with the operating system.
Effect. The PCB busy information is suspect.
Recovery. If the problem persists, contact your HP support representative and
provide all relevant information:
Descriptions of the problem and accompanying symptoms
Details from the messages generated
System number
Numbers and versions of all related products
Supporting documentation such as Event Management Service (EMS) logs, trace files,
and a CPU dump, if applicable
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is ―1304‖.
1305: ZASP-EVT-PROC-TIMES
Pin:This_ProcessTime:Last_ProcessTime in 10 sec: pin#, pt1,
pt2
pin#
is the process identification number.