ASAP 3.2 Messages Manual

HP NonStop Messages Manual Page 253 of 414
Cause. ASAPDSK could not start a measurement due to the MEASCTL process
reaching its maximum resources.
Effect. ASAPDSK cannot obtain disk counters.
Recovery. If possible, stop and delete unnecessary measurements. Restart the ASAP
Monitor once the Measure subsystem has fewer than 64 measurements configured.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is ―1712‖.
1713: ZASP-EVT-DSK-ALLOCATION-ERROR
ASAPDSK Measctl Resources Exceeded err
err
is the Measure error returned from the Measure subsystem.
Cause. ASAPDSK could not start a measurement because the MEASCTL process
reached its maximum internal counter space.
Effect. ASAPDSK cannot obtain disk counters.
Recovery. If possible, stop and delete unnecessary measurements. Restart the ASAP
Monitor once the Measure subsystem has fewer than 64 measurements configured.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is ―1713‖.
1715: ZASP-EVT-SET-CPU-ERROR
ASAPDSK Error SET DISK PARAM CPU xx cpu
cpu
is the CPU number.
Cause. The Disk Statistics Gathering process (SGP) could not start a measurement in
the specified CPU.
Effect. ASAPDSK starts the measurement in the CPU that ASAPDSK is running in.
Recovery. This message is informational only. No corrective action is needed.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.