ASAP 3.2 Messages Manual

HP NonStop Messages Manual Page 331 of 414
Cause. An error occurred when trying to close the TMFSERVE process.
Effect. The TMFSERVE process cannot close after receiving its startup message.
The TMF SGP will try to close the process again at the next sampling. No TMF
statistics are collected until the TMF SGP successfully communicates with the
TMFSERVE process.
Recovery. Use error-num to determine the cause of the error. If you cannot resolve
the problem, contact your HP support representative.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is ―4536‖.
4550: ZASP-EVT-TMF-SPI-INITBUF-ERR
ASAPTMF spi-cmd,SPI Error Init= error-num
spi-cmd
SPI command on which the error occurred
error-num
SPI error returned by SSINIT on a SPI buffer
Cause. When trying to initialize a SPI buffer, a SPI error was returned.
Effect. The SPI buffer cannot initialize, so the SPI command is not sent to the
TMFSERVE process for this sampling. The error is reported against the appropriate
domain.
Recovery. Use spi-cmd and error-num to determine the cause of the error. If you
cannot resolve the problem, contact your HP support representative.
Data Tokens.
ZEMS-TKN-TEXT contains the message text.
ZASP-TKN-ASAP-ERRORNUM is ―4550‖.
4551: ZASP-EVT-TMF-SPI-SNDBUF-SPIERR
ASAPTMF spi-cmd,SPI Error Send= error-num
spi-cmd
SPI command on which the error occurred