ASAP 3.2 Messages Manual

HP NonStop Messages Manual Page 35 of 414
4899
Error #.... occurred xxxx times
xxxx
ASAP Error Messages
This subsection contains a detailed description of the ASAP Server messages:
1000
SGP Open pid error: err
err
is the file-system error number associated with the last operation on the file.
Cause. The Statistics Gathering process (SGP) did not open.
Effect. Instead of an SGP process, a zero value was returned.
Recovery. The FILEINFO system call returned this error. For corrective action for the
specified error code, see the Operator Messages Manual or the Guardian Procedure
Errors and Messages Manual .
If the problem persists, contact your HP representative to file an HP Product Case.
1001
MONITOR -> COLLECT, error: err
err
is the file-system error number associated with the last operation on the file.
Cause. The Monitor collected statistics from the network and attempted to open the
Collector and pass statistics to it. However, the communications path was not
established.
Effect. Statistics were not written to the database.
Recovery. The FILEINFO system call returned this error. For corrective action for the
specified error code, see file-system errors in the Operator Messages Manual or the
Guardian Procedure Errors and Messages Manual.
Check to see if the Collector is installed. Make sure the Monitor and Collector are both
up and running; you can do this by entering STAT C for the Collector and STAT for the
Monitor. Check the network path connection.
If the problem persists, contact your HP representative to file an HP Product Case.