ASAP 3.2 Messages Manual

HP NonStop Messages Manual Page 41 of 414
1015
Startup Can’t Open TERM
Cause. The terminal logfile was not opened.
Effect. The system could not start up.
Recovery. Check your configured terminal file name. The SET TERM command
displays information about your terminal.
1016
SGP startup msg fail, fe: cpu, err
err
is the file-system error number associated with the last operation on the file.
cpu
is the CPU number.
Cause. The Statistics Gathering process (SGP) did not receive the startup message.
Effect. The SGP did not start up.
Recovery. The FILEINFO system call returned this error. For corrective action for the
specified error code, see the Operator Messages Manual or the Guardian Procedure
Errors and Messages Manual .
Check your ASAP configuration file (ASAPCONF) and make sure the initial parameters
are set correctly.
1017
Can’t create SGP in cpu: cpu, err 0:7, err 8:15
cpu
is the CPU number.
err
is the number indicating the outcome of the process creation attempt, where err
0:7 is:
0
No error, process created
1
Warning that the process had undefined externals, but was
started
2
No process control block available