ASAP 3.2 Messages Manual

HP NonStop Messages Manual Page 66 of 414
err
is the error returned from the GetPeekPCBs system call.
Cause. The system could not obtain process statistics.
Effect. A zero value was returned instead of a process statistics value.
Recovery. Check that your NonStop operating system version and ASAP version are
compatible. If the problem persists, contact your HP representative.
1301
ProcessInfo Returns error: err, pin#
err
is the outcome of a PROCESSINFO call.
pin#
is the PIN number of the process.
0
Indicates the status of the process CPU, PIN returns.
1
Indicates the process CPU, PIN does not exist or does not match the
specified criteria. The status for the next higher CPU, PIN in the specified
processor is returned. The four-word process ID for which status is being
returned reflects the process ID parameters, if present.
2
Indicates the process CPU, PIN does not exist, and no higher CPU, PIN
exists in the process that matches the specified criteria.
3
Indicates the process cannot communicate with the CPU.
4
Indicates the CPU is not present.
5
Indicates that the system specified by sysnum could not be accessed.
99
Indicates a parameter error.
Cause. The system could not obtain the program file name of the process. This is a
result of a process going away between a GETPEEKPCBs call and a PROCESSINFO
call.
Effect. The process information does not include a related program file name.
Recovery. This message is informational only. No corrective action is required.
1302
Unable to get device name: err, pin#
err
is the outcome of a PROCESSINFO call.