ASAP 3.2 Messages Manual

HP NonStop Messages Manual Page 77 of 414
Recovery. Stop and delete the measurement named ZASPxxx, where xxx is the
ASAP ID. Use the Measure interface MEASCOM.
1709
ASAPDSK 64 Measurements Configured err
err
is the Measure error returned from the Measure subsystem
Cause. ASAPDSK could not start a measurement. Maximum measurements were
reached.
Effect. ASAPDSK cannot obtain disk counters. Disk device status information is valid
when ASAPDSK cannot obtain the disk counters.
Recovery. If possible, stop and delete unnecessary measurements. Restart the ASAP
Monitor once the Measure subsystem has fewer than 64 measurements configured.
1710
ASAPDSK Measctl Pool Space Error err
err
is the Measure error returned from the Measure subsystem
Cause. ASAPDSK could not start a measurement. The pool space is full for code
range addresses in the MEASCTL process.
Effect. ASAPDSK cannot obtain disk counters. Disk device status information is valid
when ASAPDSK cannot obtain the disk counters.
Recovery. If possible, stop and delete unnecessary measurements. Restart the ASAP
Monitor once the Measure subsystem has fewer than 64 measurements configured.
1711
ASAPDSK Measure CPU Memory error err
err
is the Measure error returned from the Measure subsystem
Cause. ASAPDSK could not start a measurement in the specified CPU or in the
default CPU (CPU 0).
Effect. ASAPDSK cannot obtain disk counters. Disk device status information is valid
when ASAPDSK cannot obtain the disk counters.