ASAP 3.2 Messages Manual

HP NonStop Messages Manual Page 81 of 414
Recovery. Specify a valid disk volume using the ASAP command SET DISK.param
―swavol <$vol>
1741
Invalid volume specified error
error
is the measure error number.
Cause. An invalid disk volume was entered for the Measure date file.
Effect. The ASAP Disk SGP will use the volume where theASAPDSK object resides.
Recovery. Specify a valid disk volume using the ASAP command SET DISK,PARAM
―Volume<$vol>.
1742
ASAPDSK DCT access error ldev
Cause. The Disk SGP could not access the device control table. ldev represents the
logical number of the device.
Effect. ASAPDSK cannot collect disk statistics.
Recovery. Contact your HP representative.
1743
ASAPDSK cannot restart measurement.err
Cause. ASAPDSK could not restart its measurement. err represents the Measure
error returned from the Measure subsystem.
Effect. ASAPDSK could not obtain disk counters during a sample interval. Disk
statistics are set to null for the sample interval when ASAPDSK cannot get DP2
counters.
Recovery. Check the ASAP log for previous ASAPDSK messages and make the
appropriate corrections. For corrective action for the specified error, see Appendix B of
the Measure Reference Manual.
1744
ASAPDSK Disk device inaccessible ldev,
ctrl
Cause. The Disk SGP could not access the device. ldev represents the logical
number of the device. ctrl represents the controller number in decimal.