ASAP 3.2 Server Manual

HP NonStop ASAP Server Manual Page 101 of 381
The STATUS field, the one marked StateIsOp in EDL, is a special field. It has an
associated state, but objectives cannot be set against it. That operational state is
controlled only by the SGP process monitoring that object.
These tables show all the attributes for each system entity that you can set objectives
on:
CIPCLIM Entity-Supported Objective Attributes
Attribute
Description
Value
Error
Collection Error
Integer64
Present
Indicates whether an operational CLIM is present
Char 8
XStatus
Indicates whether the CLIM is connected to the
ServerNet fabric
Char 8
YStatus
Indicates whether the CLIM is connected to the
ServerNet fabric
Char 8
CIPSrvrs
Total number of socket servers
Integer16
Mode
Shows the operation mode of the CLIM
Char 8
ConnPts
Shows whether there are one or two ServerNet
connections configured per fabric between CLIM and
NSK host
Integer32
X2Status
Indicates whether the CLIM is connected to the
ServerNet fabric
Char 8
Y2Status
Indicates whether the CLIM is connected to the
ServerNet fabric
Char 8
DataIface
Total data interfaces
Integer32
DataIp
Total data IP addresses
Integer32
MgmtIface
Total mgmt interfaces
Integer32
MgmtIp
Total mgmt IP addresses
Integer32
Events
Number of syslog entries generated by the CLIMMON
process
Integer32
Restarts
Number of times CLIMMON restarted the CLIMAGT and
binary 32x processes
Integer32
Processes
Number of socket server processes
Integer32
AGTFails
Number of process failures
Integer32
SVRFails
Number of process failures
Integer32
AgtEvents
Number of event log entries
Integer32
AgtBfrDnys
Number of times a buffer for communication with NSK
could not be obtained
Integer64
AgtApiErrs
Number of errors returned from the low-level ServerNet
communication handlers
Integer64
AgtLnxErrs
Number of errors returned from CIP/Linux
Integer64
AgtBfrBytesCurr
Amount of memory currently used for communication
with NSK
Integer64