ASAP 3.2 Server Manual

HP NonStop ASAP Server Manual Page 149 of 381
*
specifies that the performance and state information for all domains on the
specified system are to be displayed. If you specify a domain or the wild-card
character (*), statistics for all of the domains in the current system are displayed.
SAMPLES count
specifies the number of sample periods to be displayed. A sample period is defined
by the RATE option in the SET command. You can specify 0 through 255 sample
periods. The default sample period number is 1.
DETAIL
displays user-defined attributes for the specified entity.
CPU cpu-number
specifies that the performance information for the APP domains executing in the
specified CPU, cpu-number, are displayed. If you do not specify a CPU, statistics
for all APPs in the current system are displayed.
STATES
displays the associated OEM state for each attribute where StatePair is true.
These OEM states are reported, depending on the type of ranking used (see the
SET OBJECTIVESRANK option of the SET Command):
Existence
1
Object exists.
Up or OK
2
Object is up or meets objectives.
Low
3
Object utilization is low.
Medium
4
Object utilization is medium.
High
5
Object utilization is high.
Warning
6
Object is at Warning level.
Critical
7
Object is at Critical level.
Down
8
Object is down or not operational.
TIME hh:mm m/d/y
defines the ending time of the display information in hours, minutes, month, day,
and year. For example, specifying TIME 10:15 when RATE is 5 indicates that
statistics collected from 10:10 to 10:15 are displayed.
hh
is the hour.